Thread tapping unit for smallest threads
|
Thread capacity
((thread cutting DIN13 - 1, 1,2 x D) |
M0,5 - M2 - X5CrNi189 / 1.4435
M0,5 - M2 9sMn28 / 1.0715
M0,5 - M3 AlCuMgPb / 3.1645 |
| Torque range
Mz |
2 - 65 Ncm |
| Spindle speed
range rpm |
150 - 1000 min-1 |
| Thread depth
/ stroke max |
30 / 32 mm |
| Column with
hand crank |
500 mm |
|
Spindle/worktable max. |
0 - 280 mm distance |
| Width / depth
/ height |
210 / 350 / 655 mm |
| Mains volt./
power consumption |
230 Volt (115 Volt), 50 - 60Hz / 200 Watt |
| Compliance to
safety regulation |
- CE / EMV conform |
| Serial
interface |
- I/O parallel / galvanic isolated
SPS-compatible |
| Parallel
interface |
- RS232 (V24) 9600 Baud / galvanic isolated |
| Finish |
- RAL 7001 silver grey, / 3003 rubin
red |
|
Operation |
- Menu driven / Host / optional PC
with WinPCA-software |
|
Error messages |
-
Acoustic alarm / I/O / RS232 / display with error message |
|
Software |
Language selector D/GB/F/NL/B/DK/S/I
Ncm Torque control setting, Mz min. – max.
Right or lefthand drive
Fast, normal and slow reverse speeds
User parameter storage of 40 different parts
Variable automatic chip clearance parameter
Lubricant pulse control
mm/Inch and metric/UNF-UNC selectable
Automatic Start / QS and SZ - control |
|
Tap-adapter / SPAB6 |
Tap adapter chuck holder system holder
system complete with 5 adapters
in wooden box 0,5 –3,0 mm / ER8 (DIN 371 |
| Compliance to safety
regulation |
- CE / EMV conform |
| Paralell interface
|
not installed |
| Serial interface |
not installed |
|
Finish |
- RAL 6001
emerald
green |
|
Operation |
-
Menu
driven |
|
Error
messages |
Acoustic
alarm - display with error message |
|
Software |
Language
selector
D/GB/F/NL/B/DK/S/I
Metric / Inch selector for tap and depth of cut
Ncm Torque control setting, Mz min. – max.
Right or lefthand drive
Fast, normal and slow reverse speeds
Autom. start with position depth control with ZAP
Cutting force FZ start sensor, only with ZAP
User parameter storage of 40 different parts
Variable automatic chip clearance parameter
Parts counter for single or total thread
Program for lubricant control with pulse and with timed flow
Program for thread cutting and forming |
